Conductivity Meter

Units of measure include µS/cm, mS/cm, ppm, ppt
Large 3-1/2 digit (2000 count) LCD display
Data Hold and low battery indication
Auto Power off with disable
Adjustable Automatic Temperature Compensation

Read more ..

Units of measure include µS/cm, mS/cm, ppm, ppt
Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 — conveniently calculates the TDS value
Large 3-1/2 digit (2000 count) LCD display
Data Hold and low battery indication
Auto Power off with disable

Read more ..

Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution
Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L
Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value
Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends
Data Hold, Auto Power Off and low battery indication

Read more ..

Measures Conductivity, TDS, Salinity, Resistivity, pH, mV and Temperature
Automatic one button pH calibration (4, 7, and 10pH)
Choice of 3 point pH calibration for better accuracy
One point Conductivity calibration - automatically recognizes 8 calibration solutions from USA, Europe and China series
Automatic Temperature Compensation (non-linear compensation for purified water

Read more ..

Range: 0.0 to 199.9 µS/cm, 0 to 1999 µS/cm, 0.00 to 19.99 mS/cm, 0.0 to 199.9 mS/cm
Resolution: 0.1 mS/cm
Accurac: ±1% F.S. (excluding probe error)
Temperature Compensation: automatic, 0 to 50°C (32 to 122°F)

Read more ..

The DiST® family of testers is widely used for monitoring EC/TDS in drinking water, water conditioning, reverse osmosis, cooling towers, wastewater, laboratories, agriculture, aquaculture and aquariums, hydroponics and the printing industry

Read more ..

Range 0.0 to 99.9 µS/cm
Resolution 0.1 µS/cm
Accuracy ±2% F.S.
Pure Water Test (PWT) enables users to check the purity of your distilled or demineralized water in laboratory or industrial environments.

Read more ..

pH Rage: 0.00 to 14.00 pH
EC Range: 0 to 3999 µS/cm
TDS Range 0 to 2000 ppm
Temperature Range: 0.0 to 60.0°C
Waterproof and designed to float
Battery % displayed at startup

Read more ..

HI 981410 EC tester has been specifically designed to address the needs of operators in hydroponics, greenhouses and nurseries.
Range 0.00 to 10.00 mS/cm
Resolution 0.01 mS/cm
Accuracy ±2% F.S.

Read more ..

The HI 98331 Soil Test is a pocket tester specifically designed to directly measure soil conductivity and temperature. With a temperature sensor in the penetration probe, measurements are automatically temperature compensated.
Range Conductivity: 0.00 to 4.00 mS/cm (dS/m)
Range Temperature: 0.0 to 50.0°C
Resolution Conductivity: 0.01 mS/cm
Resolution Temperature: 0.1°C

Read more ..

When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST's ease of use, in combination with its affordability made it the standard in EC and TDS measu

Read more ..

Range 0.000 to 1.999 µS/cm
Resolution 0.001 µS/cm
Accuracy ±2% F.S.
Ultra Pure Water (UPW) is an ideal tester for MΩ checks. Graphite sensors for reduced polarization. Replaceable probes

Read more ..

Waterproof and it floats!
High accuracy
Automatic calibration and temperature compensation
HOLD function
BEPS (Battery Error Prevention System)

Read more ..

HI 8033 is a handheld conductivity meter with the ability to take measurements in three different ranges. The four stainless steel rings are embedded in the resin shaft of the probe to create a smooth surface for fast and easy cleaning.

Read more ..

This instrument utilizes a four ring potentiometric probe with platinum sensor. By utilizing the 4-ring method, it is possible to measure very low or high conductivity levels (up to 200 mS/cm) without changing probes.

Read more ..

This instrument utilizes a four ring potentiometric probe with platinum sensor that offers greater versatility over typical amperometric designs. A potentiometric probe works on the principal of induction which eliminates the effects of polarization.

Read more ..

HI 2300 measures EC, TDS, NaCl and temperature. In conductivity and TDS ranges (up to 500 mS/cm and 400 g/L respectively) the instrument automatically chooses the best scale to maintain the highest accuracy.

Read more ..

HI 4321 is a research-grade EC/Resistivity/TDS/Salinity benchtop meter with a large, color, graphic LCD with backlight, capable of millesimal measuring resolution of conductivity with an extended range from 0.001 µS/cm to 1 S/cm.

Read more ..

HI 8730 EC/TDS meter is lightweight, water-tight and easy to maintain. Each desired measurement mode features its own key for quick selection.

Read more ..

EC Range: 0 to 6000 µS/cm
TDS Range: 0 to 3000 ppm
Temperature Range: 0 to 70°C
These EC/TDS meters are lightweight, water-tight and easy to maintain. Each desired measurement mode features its own key for quick selection.

Read more ..