Conductivity Meter
Hanna HI 8733 Multi-range Portable EC Meter ATC
Range: 0.0 to 199.9 µS/cm, 0 to 1999 µS/cm, 0.00 to 19.99 mS/cm, 0.0 to 199.9 mS/cm
Resolution: 0.1 mS/cm
Accurac: ±1% F.S. (excluding probe error)
Temperature Compensation: automatic, 0 to 50°C (32 to 122°F)
Resolution: 0.1 mS/cm
Accurac: ±1% F.S. (excluding probe error)
Temperature Compensation: automatic, 0 to 50°C (32 to 122°F)
สินค้าจากสหรัฐอเมริกา
![]()
EC Meter Hanna HI 98304
This conductivity meter features an amperometric graphite electrode that provides better repeatability in measurements since they do not oxidize. An amperometric measurement of EC is based on Ohm’s Law, I = V/R where R depends on the distance between two pins and their surface. Oxidation changes both the distance and surface which will affect accuracy. The DiST’s non-oxidizing graphite pins are able to provide an optimal surface for accurate, dependable results.
When calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester.
When calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester.
สินค้าจากสหรัฐอเมริกา
![]()
Hanna HI 98308 Water Purity Tester with 0.1 µS, cm resolution
Range 0.0 to 99.9 µS/cm
Resolution 0.1 µS/cm
Accuracy ±2% F.S.
Pure Water Test (PWT) enables users to check the purity of your distilled or demineralized water in laboratory or industrial environments.
Resolution 0.1 µS/cm
Accuracy ±2% F.S.
Pure Water Test (PWT) enables users to check the purity of your distilled or demineralized water in laboratory or industrial environments.
สินค้าจากสหรัฐอเมริกา
![]()
Hanna HI 981410 EC Tester for Fertigation Solutions
HI 981410 EC tester has been specifically designed to address the needs of operators in hydroponics, greenhouses and nurseries.
Range 0.00 to 10.00 mS/cm
Resolution 0.01 mS/cm
Accuracy ±2% F.S.
Range 0.00 to 10.00 mS/cm
Resolution 0.01 mS/cm
Accuracy ±2% F.S.
สินค้าจากสหรัฐอเมริกา
![]()
Hanna HI 98331 Soil Test Direct Soil EC Tester
The HI 98331 Soil Test is a pocket tester specifically designed to directly measure soil conductivity and temperature. With a temperature sensor in the penetration probe, measurements are automatically temperature compensated.
Range Conductivity: 0.00 to 4.00 mS/cm (dS/m)
Range Temperature: 0.0 to 50.0°C
Resolution Conductivity: 0.01 mS/cm
Resolution Temperature: 0.1°C
Range Conductivity: 0.00 to 4.00 mS/cm (dS/m)
Range Temperature: 0.0 to 50.0°C
Resolution Conductivity: 0.01 mS/cm
Resolution Temperature: 0.1°C
สินค้าจากสหรัฐอเมริกา
![]()
Conductivity, TDS, Temperature Meter Hanna HI 98312
ช่วงในการวัดค่า EC: 0.00 to 20.00 mS/cm
ช่วงในการวัดค่า TDS: 0.00 to 10.00 ppt
ช่วงในการวัดค่าอุณหภูมิ: 0.0 to 60.0°C / 32 to 140.0°F
ความละเอียด EC: 0.01 mS/cm
ความละเอียด TDS: 0.01 ppt
ความละเอียดอุณหภูมิ: 0.1°C / 0.1°F
ความถูกต้อง EC: ±2% F.S.
ความถูกต้อง TDS: ±2% F.S.
ความถูกต้องอุณหภูมิ: ±0.5°C / ±1°F
ช่วงในการวัดค่า TDS: 0.00 to 10.00 ppt
ช่วงในการวัดค่าอุณหภูมิ: 0.0 to 60.0°C / 32 to 140.0°F
ความละเอียด EC: 0.01 mS/cm
ความละเอียด TDS: 0.01 ppt
ความละเอียดอุณหภูมิ: 0.1°C / 0.1°F
ความถูกต้อง EC: ±2% F.S.
ความถูกต้อง TDS: ±2% F.S.
ความถูกต้องอุณหภูมิ: ±0.5°C / ±1°F
สินค้าจากสหรัฐอเมริกา
![]()
Hanna HI 98309 Water Purity Tester with 0.001 µS, cm resolution
Range 0.000 to 1.999 µS/cm
Resolution 0.001 µS/cm
Accuracy ±2% F.S.
Ultra Pure Water (UPW) is an ideal tester for MΩ checks. Graphite sensors for reduced polarization. Replaceable probes
Resolution 0.001 µS/cm
Accuracy ±2% F.S.
Ultra Pure Water (UPW) is an ideal tester for MΩ checks. Graphite sensors for reduced polarization. Replaceable probes
สินค้าจากสหรัฐอเมริกา
![]()
Conductivity, TDS, Temperature Meter Hanna HI 98311
This meter includes features such as: a replaceable graphite electrode, adjustable TDS ratio, °C or °F measurement, Automatic Temperature Compensation (ATC) with adjustable β, battery level indicator, stability indicator, automatic shut-off and automatic calibration.
The graphite conductivity electrode provides greater accuracy because it resists contamination by salt deposits in the sample.
All of these features are packed in a floating, waterproof casing. This 3-in-1 tester is unmatched in EC/TDS/ temperature measurements
The graphite conductivity electrode provides greater accuracy because it resists contamination by salt deposits in the sample.
All of these features are packed in a floating, waterproof casing. This 3-in-1 tester is unmatched in EC/TDS/ temperature measurements
สินค้าจากสหรัฐอเมริกา
![]()
Conductivity, TDS Meter Hanna HI 8033
HI 8033 is a handheld conductivity meter with the ability to take measurements in three different ranges. The four stainless steel rings are embedded in the resin shaft of the probe to create a smooth surface for fast and easy cleaning.
สินค้าจากสหรัฐอเมริกา
![]()
Hanna EC 214 Multi range Conductivity Meter
This instrument utilizes a four ring potentiometric probe with platinum sensor. By utilizing the 4-ring method, it is possible to measure very low or high conductivity levels (up to 200 mS/cm) without changing probes.
สินค้าจากสหรัฐอเมริกา
![]()
Hanna EC 215 Multi-range Conductivity Meter with ATC
This instrument utilizes a four ring potentiometric probe with platinum sensor that offers greater versatility over typical amperometric designs. A potentiometric probe works on the principal of induction which eliminates the effects of polarization.
สินค้าจากสหรัฐอเมริกา
![]()
Hanna HI 2300 Autoranging EC, TDS, NaCl, Temperature Meter
HI 2300 measures EC, TDS, NaCl and temperature. In conductivity and TDS ranges (up to 500 mS/cm and 400 g/L respectively) the instrument automatically chooses the best scale to maintain the highest accuracy.
สินค้าจากสหรัฐอเมริกา
![]()
Hanna HI 4321 EC TDS Resistivity Salinity and Temperature (Research Grade)
HI 4321 is a research-grade EC/Resistivity/TDS/Salinity benchtop meter with a large, color, graphic LCD with backlight, capable of millesimal measuring resolution of conductivity with an extended range from 0.001 µS/cm to 1 S/cm.
สินค้าจากสหรัฐอเมริกา
![]()
Hanna HI 8730 EC, TDS and Temperature Meter
HI 8730 EC/TDS meter is lightweight, water-tight and easy to maintain. Each desired measurement mode features its own key for quick selection.
สินค้าจากสหรัฐอเมริกา
![]()
Hanna HI 8731 EC, TDS and Temperature Meter with extended ranges
EC Range: 0 to 6000 µS/cm
TDS Range: 0 to 3000 ppm
Temperature Range: 0 to 70°C
These EC/TDS meters are lightweight, water-tight and easy to maintain. Each desired measurement mode features its own key for quick selection.
TDS Range: 0 to 3000 ppm
Temperature Range: 0 to 70°C
These EC/TDS meters are lightweight, water-tight and easy to maintain. Each desired measurement mode features its own key for quick selection.
สินค้าจากสหรัฐอเมริกา
![]()




Conductivity Meter















